Back To: Home Page
Angle CutterThe Simplex Precision Angle Cutter is best used for cutting angles or bevels onto the edges of rubber or similar composition materials. This machine can be rolled along the edge of the material, or the material can be fed into it manually.
The Simplex Precision Angle Cutter can cut material up to one inch thick, and it is adjustable from 45 to 90 degrees. Customized machines can be built capable of cutting angles less than 45 degrees, but this will reduce the thickness of the material that can be cut. The angle of the cut is repeatable to within one degree.
| Blade Diameter | Motor RPM | Blade RPM* | Durometer Range @1/2" | Material Thickness | Voltage |
|---|---|---|---|---|---|
| 7.5 inches | 1725 or 3450 | 172.5 or 345 | less than 85 | 1 inch | 110 / 220 vac |
*Motor and gear combinations will determine the machine RPM.
Standard features include:
Cost: $5,995.00
Delivery time: 4-6 weeks
Have a specific question about the Simplex Angle Cutter?
E-mail PACinfo@SimplexCMCI.com
Made in USA